Or as low as Description
High Accuracy and Precision.
The TORK CRAFT Digital Fractional Verniers provide a direct reading of the distance measured with high accuracy and precision. There are two different vernier calipers available in the Tork Craft range, Analog vernier callipers and Digital vernier calipers.
FEATURES
- Jaws for measuring outer dimensions.
- Jaws for measuring inner dimensions.
- ON/OFF button.
- Zero button.
- Locking screw.
- Unit selector button.
- Stem for measuring depth.
BEFORE USING A VERNIER CALIPER
- Make sure the workpiece being measuring is clean and has no burrs on the edges.
- The workpiece’s temperature must be around 20°C to have consistent measuring results.
- Precision measuring tools should never be put near a magnetic area to avoid the vernier caliper being magnetized.
HOW TO USE AND READ A DIGITAL VERNIER CALIPER
- Close the jaws completely and switch ON the vernier caliper.
- Press the ZERO button to calibrate the digital readout.
- Open the jaws of the TORK CRAFT Digital Fractional Verniers and position both jaws firmly to the ends of the piece being measured.
- Tighten the locking screw so that the jaws don’t move.
- Switch the vernier calliper OFF when not in use.
- Methods used to measure:
- Depth by using the stem.
- Inner dimensions by using the inner jaws.
- Outer dimensions by using the outer jaws.
- The digital display will flash to indicate a low-level battery.
Reviews
There are no reviews yet.